I had a wonderful day going to Mood and picking out my fabric for my One Punch Man outfit. It was my first morning officially between jobs and it was wonderful!
I ran into my friend at Mood and he knew the show and was very excited about my costume choice! He saw me when I was getting about 5 yards of yellow cotton and we talked about the best fabric for the gloves and cape. I ended up picking out a polyester stretch fabric for the cape and a thicker jersey for the gloves so that they will hopefully stay on. I will also make some covers for my boots to make them red too.
I’ve realized my zipper should technically be silver but I’m going to have fun with this and not sweat the details that much.
I have combined three patterns to try and do this – D’s vogue pants pattern, and two butterick shirts.
I am not planning to do fancy seam finishes because I just have other stuff to do… like make cardboard robot arms for D
As the week progressed, I continued to chip away at this outfit. There are many pieces and the fit is actually a little complicated because the shirt has to attach directly to the pants!!
First, I made the jumpsuit which I think means I have officially made my first pair of pants for myself! I then attached the shirt very carefully and then cut out the proper facing for the neckline.
The polyester seemed like it could be tricky so I decided to prick stitch this whole thing. I am actually getting better at this technique and I like the way it looks.
From there it was cape, gloves, and shoe cover time!!!
The cape was pretty easy – but gloves are tricky!!!! I did it “Thanksgiving Turkey” style but at first I actually made the fingers too narrow and had to re sew them. It was an interesting learning experience.
The shoe covers were also pretty easy -my own original idea! I made a tube for my legs and then a flappy circle with another half circle sewn on the bottom. This covered the tops of my shoes but my heels and middle sole of the shoe were exposed so I would still have some traction on the ground.
From here… it was robot armour time for D! This was made the day of the party and I basically took some of the ideas of samurai armour that we saw in the Tokyo Samurai museum and some cosplay googling to make this out of old amazon boxes we stored up and some acrylic paint. Here is the mess that was left behind:
In the final minutes of getting really to leave to the party – the bald cap was NOT working. It was too hard to put on and seemed like it would get hot. D as the continuous source of supportive sanity told me to tear it off before it was too late. I took his advice and did not look back!
Here’s the final look!
One person at the party recognized us LOL but I did not do this for the fame, this costume is exclusively for myself based on the joy that show brings me. D later pointed out that that is truly the most One Punch Man style costume possible hahaha. I did receive many nice compliments about the details and sewing. It was a really fun night and great to see friends!
It’s done and possibly better than ever before! This is made with all french seams, bias binding on the bottom edge, and a few seams where everything is tucked in before sewn down. You could almost wear this inside out!
This was a wonderful weekend of tennis, brunch with friends, some chores, and sewing!
I got into the zone and so I kind of forgot to take more pictures. Opps.
Sometimes unexpected events come up and things take longer than expected. In these times, it can be hard to make time for sewing while balancing everything else. This is when it’s important to focus on little things. Last night I tackled this placket! These are tough and include a few tricky details. I had about 30 min before bedtime and it was really nice to do just a little bit. I forgot to play music this time. Sometimes it’s just nice to hear the hum of the machine.
For this project, I transitioned back to my existing fabric collection and broke out a small circle print fabric I had purchased with the second laundry disaster. This fabric had survived and it was time to bring it to life!
I started out by trying to get everything I needed together first. This involved a quick trip to F S Fabrics and I finally bought some real fabric scissors and nice buttons.
I will use the white buttons on this shirt.
By the end of the night I was here:
Boy oh boy it is a lot of cutting and honestly, these new scissors are EXACT but also heavy. I may switch back to using paper ones lol.
With all that cutting, something has to pass the time right? I will try to start featuring this more for fun:
After the navy dress, I felt a little hesitation starting this dress. I wanted to make a style that would be unique and push my design skills a little.
I had also been inspired by some of the Dries van Noten dresses which had panels which hung down past the hem. As I made the dress, I also decided to do it without sleeves so I can layer it over a turtle neck.
It was fun to put this together and the fabric is SO SOFT!
I also made sure I used the direction of the stripe threads to make the fabric face the same way throughout the outfit.
First I made a normal dress with a standard back zipper. From there, I played around with the plaacement of the front panel. To add flexibility to the fabric and give it a looser drape, I cut it on the bias (diagonal)
Last but not least, a great friend was in town from Saskatchewan and we got lunch! Afterward the Equine Immersion Program was having an even called Trail to Zero with NYC police officers and veterans to raise awareness and help prevent veteran suicides. They were riding 20 miles through the city because every day approximately 20 veterans across the country die by suicide. It was very neat to see them have such a unique event and it was great to talk to the people involved.
It was a great day! Now it’s time to kick off the process for a few new back to school dress shirts. Stay tuned!
Here was the game plan! I was so excited to whip through this dress and make a really nice classic look… but… it’s only been going “sew sew” (is that a pun? It’s supposed to be)
The first challenge was that once I was home, I wasn’t 100% sure if I liked this fabric after all…
It felt very classic and sort of like a polo/golf vibe. It’s a cotton men’s shirting fabric. I thought it would be neat to have a striped shirtdress in my wardrobe, but then I started to question if I actually liked it.
At first, I gathered the skirt but it had too much volume. It was not very flattering 😦 there is no picture of this, but beleive me, it happened and wasn’t good.
I tore it off and really thought about a way to achieve a less busy look. After some time, I decided that pleats could be the answer! I hoped the pleats will be flatter yet still break up the stripes and make a nice A line silhouette. It started to get better! I used an inverted box pleat.
Last but not least! I visited F&S fabric store to pick up some unique buttons and made a sash on the bias to finish it up. I also actually hand pick stitched the collar too as inspired by my sewing friend George who showed me a jacket he was working on that used this technique!
With the pleats, it was much easier to align the stripes between the collar, bodice, and skirt! This also makes the sash pop a little bit more since those stripes go diagonally.
Overall, I feel like I achieved the look I set out to create, but I will be a little more discerning with my in-store fabric choices so that I hopefully feel more confident throughout the project.
Last but not least, I’ve learned that the two daughters of my husband’s coworker have visited the blog and are going to be taking sewing classes! Just wanted to say HI! They are about 10 and I really can’t wait to hear about if they like their class!!! They have a very cool Mom for encouraging them too!
I had so many things for myself planned, I wanted to mix in one thing for D before it started to get too cold to wear a few of the summer fabrics we bought in Chicago.
It was time to try and make a short sleeve Liesl + co shirt! This is a really nice feeling cotton/linen and if I remember right it was only $3 a yard on clearance at Fisherman’s Fabrics!
It all came together quite nicely!
I took one picture… here was the inside of the collar about to be flipped right side out and have the pointy part of the collar attached.
I think the back lines up pretty well too!
Last but not least I used bias tape to finish the sleeves and bottom. This really made the shirt hang nicely. You can see the detail on the sleeve (a few of the stripes appear diagonal aka “on the bias”)! This sleeve is rolled up here to show this detail.
Next time I made one of these, I am going to start playing around with making the inner placket and underside of the collar different colors. I see a lot of that on the train and I want to give it a shot. I also ran into my mood-train-friend George the other day and we were talking about techniques to make things fancier. He is working on an awesome reversible grey shawl collar jacket. One day I’ll be like him!
My loud scrap busting sewing continues with the poodle top!
This was the leftovers of the blue squares blouse that was too loud… and I think I’ve transformed it into something else that is also… kind of loud
Here’s where we left off. I was finalizing the fit and it was SO MANY poodles!
This peplum used only a forward facing pleat and not a box pleat. That made it have a little less volume as a box pleat includes two pleats that face in toward each other.
From here, I sewed on the peplum and decided to drop the neckline into a v-neck. I think this makes the outfit a little less busy.
This also inspired me (who are we kidding? D totally said I should just make this) to make a basic black pencil skirt. I used the skirt block we developed at Mood U. That pattern is the ULTIMATE pencil skirt and I’m so happy with it.
I am so proud of D! One night we were talking and I asked if he would ever want to try to see how it worked and he agreed that it could be cool.
With that in mind, last night I started to make the poodle peplum to expand further my Carolina Herrera print wardrobe. At first I was working on all the bodice seams for the front and back panels. It then became time to attach them at the shoulder and when I looked at the very straight seam it occurred to me that D could do it!
I grabbed him from the other room and picked up a scrap of I folded in half. From there I showed him how the presser foot went down and then how to hand crack a few stitches forward. I also briefly lifted up the fabric to show how the shuttle circled around to pick up the thread. From there, it was pedal time! He did a great job going forward and then we backstitch a little!
It was time to try again on the final pass on the french seam! I had already sewn the inner seam and so we flipped it inside out and d sewed it down!! I’m so proud of him! See below for more bodice pictures.